The machine adopts zero-speed automatic paper-feeding method, head-to-head butt-joining paper, double-sided adhesive connection tape, can avoid the problem of lap-on paper to the flexographic resin plate. It is a flexo-printing, inspection, rewinding, continuous machine. The best auxiliary machine for production without stopping the machine. The use of non-stop paper can greatly reduce the waste rate of equipment, while saving a lot of manpower, electricity, materials, etc., and can increase equipment productivity, facilitate warehouse material management, and have a very high return on investment.
The main technical parameters:
1. Unwinding station: double-station without shaft unwinding, maximum winding diameter Φ1200mm
2. Discharge tension: primary tension: magnetic powder constant tension secondary tension: heavy hammer constant tension
3. Paper feeding method: head-to-head butt joint paper, double-sided adhesive connection tape
4. Discharge shaft: 3〃 (or 6〃 12〃) heavy load expansion shaft
5. Width specification: 800mm
6. Pressing method: Pressing bar pneumatic pressing paper.
7. Unwinding main traction: AC vector motor synchronous drive
8. Paper receiving process: independent PLC intelligent program control
9. Aluminum alloy paper guide roller and paper storage rack, the maximum paper storage length 28M
10. Paper feed speed: less than or equal to ≤80-120 m/min
11. Maximum operating speed of the device 120 m / min
12. Total power: 25KW
13. Gas consumption: 0.5Mpa, 0.1m3/min
14. Dimensions: (length × width × height) 6200 × 2880 × 2030 mm